Posts Tagged ‘cats’

The first weekend in March I spent a wonderful weekend away quilting in Henniker, New Hampshire.   A few of my friends (well, there are 5 of us) discovered the Henniker House Bed & Breakfast last year.

Henniker House B&B

The B&B has five guest rooms as well as a beautiful open great room overlooking the Contookook River.  Innkeeper Kate  generously let us spread out our sewing machines, fabric, and the rest of our quilting stuff – and leave it there! – all weekend.  Add home-cooked breakfasts every morning and a great quilt store – Quilted Threads – conveniently located right next door, and it made the perfect setting for serious quilting and ‘away’ time.   Last year we stayed for the  weekend, and this year we decided a longer 3 day weekend was in order.

What a treat!  Despite the snow, the weather cooperated so we took a break from quilting to walk  along the river and check out the nearby trails.

We brought twice as many projects as we could work on.  We cut, measured, pieced different types of blocks including two sets with curved seams, hand applique’d, and knitted.  We used the floors in the larger rooms as design walls.


I put together kits for upcoming workshops and did some machine quilting.   I came so-close to finishing the top of one of my multi-year quilt projects – I think I will call it my ‘ten year quilt’ when I finally finish it.  I completed the  first block in 2003 (wow! it seems like yesterday…)



And – what quilting retreat would be complete without a pair of feline sewing supervisors?












Read Full Post »

Is the thread tension too tight?  Too loose?  How do I fix it?  One of the secrets to beautiful machine quilting is getting the best stitch you can with your sewing machine.  But what does a good stitch look like?  It is when the thread from the needle and the thread from the bobbin meet and cross over exactly in the middle of what you are sewing.  When you are machine quilting, this crossing of the threads should be completely buried in the middle of your quilt sandwich.  The bobbin thread will not poke up to the top of your quilt, and the top thread will not be pulled through to the back.  (It’s especially easy to see this if you are using different color thread in the needle and the bobbin.)


Broken strings and harp assistant

The weather has been very changeable this summer, and it is important to check the thread tension every day for machine quilting, especially with weather changes.   The summer weather – from hot and humid to cold and damp, and everywhere in between – wreaks havoc with threads of all type – including the natural gut strings on my harp.  This is especially true in an un-airconditioned house!

Just like the gut strings on my harp, cotton and silk thread is a natural fiber that responds to the temperature and humidity in the environment.  Last week as the weather changed day by day, from cool and damp to hot and humid, I dutifully adjusted the tension and checked the back of my piece every day. Everything seemed to be going well … but then I looked at the back again.

Hmmmm…. the threads on the back seem to be riding on top of the fabric, rather than being firmly anchored inside the quilt sandwich.  I rechecked the top tension.  I rechecked – and changed – the bobbin tension.  I rethreaded the machine.  Nothing helped – the stitch still didn’t look quite right.


So I picked up an old practice sample, determined to get it right.  I stitched a few lines, and then looked at the  stitching samples on this piece, remembering the first time I used it.  I was demoing at my guild quilt show, and the tension became SO bad that I thought there was something wrong with my machine!


That time, I was surprised and a little embarrassed to find out it was just a bent needle.  A bent needle?  So maybe I should try a new needle!

And voila! like magic, the thread behaved just as it should and the machine was sewing that ‘perfect stitch’.


So this time, the solution to getting the right thread tension was not rethreading the machine or adjusting the tension in the needle or the bobbin, but replacing the needle.  Sometimes it can be cleaning the lint out of your machine.  I am sure there are even more solutions … what have you discovered?

Read Full Post »